{Sampul Depan}
Nama:Prosiding SNTTM XVII
Tahun:2018
ISBN/ISSN:2623-6313
Tema:Peran ilmu teknik mesin yang berorientasi global dalam mendukung pembangunan nasional yang berkelanjutan
Jumlah Makalah:167
 
Tanggal Seminar:04-10-2018 s.d. 05-10-2018
Lokasi Seminar:Kupang
Penyelenggara:Universitas Nusa Cendana (UNDANA)
Halaman Sampul
Halaman Pengantar
Halaman Daftar Isi
(KE) Konversi Energi
1.
KE-46
Preliminary Research On Quadcopter With Photovoltaic To Increase Flight Time
Evi Sofia, Hery Sonawan,Dian Kurniawan, Ahmad Iqbal
264 - 270
2.
KE-32
Optimization of a Dual-Evaporator Vapor Compression Refrigerator
Matheus M. Dwinanto, Suhanan, Prajitno
181 - 187
3.
KE-33
Pengaruh Penambahan Fix Drag Reducing Pada Bilah Terhadap Kinerja Turbin Angin Savonius
Indra Herlamba Siregar, Moch Effendy,Akhmad Hafizh Ainur Rasyid
188 - 192
4.
KE-34
Effect of Microwave longtime of Esterification Process to Physics Properties Of Biodiesel Rubber Seed Oil (Hevea Brasiliensis)
Slamet Wahyudi, Nurkholis Hamidi, Yuniar A Arsandi
193 - 197
5.
KE-35
Performance analysis of hybrid PV/T solar collector under the tropical climate conditions of Indonesia
Amrizal, Amrul, Miftahul Aziz, Adi Suprianto
198 - 202
6.
KE-36
Physical Properties of Biodiesel from Microalgae Chlorella Vulgaris
Adjar Pratoto, Rury Dwi Nurhadi,Abdi Dharma
203 - 207
7.
KE-37
Planning A Condenser Type Concentric Tube Exchanger As An Instrument For Testing And The Learning
Sobar Ihsan
208 - 211
8.
KE-38
Simplification Design of Nozzle and Blade of Pico Hydro Turbine type Cross-flow
Dendy Adanta, Aji Putro Prakoso, A.I. Siswantara, Warjito, Budiarso
212 - 217
9.
KE-39
The Addition of Phase Change Materials in the Wall to Reduce the Overall Thermal Transfer Value (OTTV)
Muhammad Irsyad, Amrizal,M Dyan Susila
218 - 223
10.
KE-40
The Effect of Addtion Bioethanol From Palm Fruit to Calorific Value Gasoline and Exhaust Emissions of Vehicle 4 Stroke 125 cc
224 - 229
11.
KE-41
The Effect of Air Flow Rate on the Performance of Thermoelectric Cooling System
Mega Nur Sasongko,Franz Jipri Fernando
230 - 234
12.
KE-42
The Effects Of Mango Biodiesel Seed Oil To Diesel Engine Performance
Willyanto Anggono, R. Santoso , Sutrisno, Fandi D. Suprianto,Gabriel J. Gotama
235 - 241
13.
KE-43
Thermal Characteristic study of biomass for heating rate and liquid yield on pyrolysis process to produce bio-oil
Nasruddin A. Abdullah, Rachmat Rahardian, Imansyah Ibnu Hakim, Nandy Putra,Raldi A. Koestoer
242 - 248
14.
KE-44
Thermal Heating Study Of Microwave Reactor For Pyrolysis Of Vegetable Wastes
Defani Alrasyidi Nugraha, Wirawan Sumbodo, Samsudin Anis
249 - 252
15.
KE-45
Vortex Shedding Passing Through Four Cylinders
Benny Dwika Leonanda
253 - 263
16.
KE-31
On the Effect off Tube Bank Configuration to Heat Transfer Effectiveness in Heat Pipe Heat Exchanger for Air Conditioning System
Ragil Sukarno, Nandy Putra, Ridho Irwansyah
174 - 180
17.
KE-47
Process of Coffee Processing of Arabic Powder and Physical Changes Due To Adjustment Temperature
Musa Bondaris Palungan , Charnia Iradat Rapa, Salma Salu
271 - 274
18.
KE-48
Sistem Pendingin Central Processing Unit (CPU) Berbasis Cascade Straight Heat Pipe
Wayan Nata Septiadi, I Nyoman Budiarsa, Imanuel Adam Tnunay , IGAA Desy Wulandari,Wayan Ainun Wildan Ula
275 - 281
19.
KE-49
Analysis of the Influence of Engineering Waste Measures on 3 inch Single Compression Hydraulic Pump Efficiency
Gusnawati, Rima N Selan, Daud P Mangesa, Adi Tobe
282 - 289
20.
KE-50
Experimental Study of Heat Transfer on Household Scale Mini Incinerators
Wahyu H. Piarah, Zuryati Djafar,Thomas Tjandinegara, Zulkifli Djafar, Putri Githa
290 - 294
21.
KE-51
Analysis of Heat and Mass Transfer on Fungi Growth Inside of Building Walls and Increasing of Energy Consumption, Case Study: Jakarta and Medan Weather Data
Nasruddin, M. Rifqi Audi, Hafidho Ilham, Juno Dwi Putra, Yovan Okta Ananda
295 - 299
22.
KE-52
Efek Sudut Diffuser terhadap Tekanan Suction pada liquid-Gas Ejector
Daru Sugati,Marwan Effendy, Sugiarto
300 - 303
23.
KE-53
Experimental Study on Waste Biomass Torrefaction Using a Continuous Tubular Reactor
Amrul, Agus Apriyanto, Ika Sanjaya, Amrizal
304 - 309
24.
KE-54
Pengembangan Desain Model Prototipe Mesin Cleaner Storage Water
Husen Asbanu, Yefri Chan,Jamaludin Purba
310 - 314
25.
KE-55
Feasibility Study Of Gt Power Augmentation By Tes-Tiac
Agung Subagio
315 - 319
26.
KE-56
Pressure Drop and Void Fraction of Two-phase Evaporative Propane in 7.6mm Horizontal Circular Tube
Agus S. Pamitran, Sentot Novianto, Raldi A. Koestoer, Nasruddin, M. Idrus Alhamid
320 - 324
27.
KE-57
Ulasan Perkembangan Pulsating Heat Pipe dengan bentuk penampang circular
Evi Sofia, Nandy Putra, Adi Winarta
325 - 330
28.
KE-58
Potential of Cost Savings in the Rotary Kiln with a Capacity of 130 ton/hr by Means of Fuel Diversification
Imansyah Ibnu Hakim, Hidayah
331 - 340
29.
KE-59
Error estimation of a function based on uncertainty of measurement results using error propagation method
Ridho Irwansyah
341 - 344
30.
KE-60
Development of Gas Distribution Pipelines for Households
Warjito , Ikhsan Lazuardi Imani
345 - 350
31.
KE-16
Design of Hydraulic Ram Pump To Help The Community Agricultural Irrigation System In Sumberrejo, Kemiling Distric, Bandar Lampung
Jorfri Boike Sinaga, Harnowo Supriadi, Ahmad Suudi, Raja Aman Simarmata, Sugiman
93 - 97
32.
KE-02
Analyse Coefficient Of Performance System To Result Of Condensation At Appliance Of Converter Portable
Fathir Muhammad, Dominggus G.H.Adoe, Gusnawati
8 - 13
33.
KE-03
Analysis of heat loss of hot mix asphalt during the waiting time the overlay
Muhammad Muhammad, Ahmad Syuhada, Syifaul Huzni, Zahrul Fuadi
14 - 21
34.
KE-04
Analysis of Seal Gas Supply Conditioning and Numerical Simulation of The Influence of Seal Gas Supply Pressure on the Compressor Balance Line Pressure of Labyrinth Dry Gas Seal
MSK Tony Suryo Utomo, Syaiful, Riszcky Fermansah
22 - 31
35.
KE-05
Analysis of The Effect of Temperature and Time of Distillation toward Bioethanol Alcohol content of Lontar (Borassus Flabellifer) Fruit Mesocarp
Dominggus Adoe, Defmit Riwu, Musa Magang
32 - 36
36.
KE-06
Analysis Of The Utilization Of Corn Cobs Waste As An Alternative Fuel Based On Grain Variations
Sallolo Suluh, Petrus Sampelawang, Frans Robert Bethony, Yafet Bontong,Gabriel Padda Pabisa
37 - 42
37.
KE-07
Analysis of Water Hyacinth Dryers Using Fluent 6.2.16
Noviyanti Nugraha, M. Alexin Putra, Aep Syaeful Rohman, Danang Pinanditio
43 - 48
38.
KE-08
Analysis On Solar Heating System Error On Public Road Lighting Power Plant In Banda Aceh And Sabang
Ahmad Syuhada, M. Ilham Maulana
49 - 54
39.
KE-09
Analysis Performance of Savonius Wind Turbines with combined blade without loaded
Arifin Sanusi, Nurhayati,Hikmah
55 - 59
40.
KE-10
Analysis Type of Fluid with Thermosyphon Cooling System Against with Output Power Thermoelectric Generator
Ben Vasco Tarigan, Arifin Sanusi,Marsel Marthinus Liu
60 - 63
41.
KE-11
Application of 3-inch Hydraulic Ram Pump in Dryland Irrigation at The Baumata Village, Taebenu District, Kupang Regency
Muhamad Jafri, Wenseslaus Bunganaen, Nurhayati,Gusnawati
64 - 68
42.
KE-12
Characteristic Testing of Solar Still X Desalination Technology in Indonesia using Seawater
Raldi Artono Koestoer, Ibnu Roihan , Valerie Deva Simangunsong, Adi Surjosatyo
69 - 77
43.
KE-13
Characteristics Of Pet Plastic Pyrolysis Products With Temperature Variations
Hesti Istiqlaliyah, Am Mufarrih,M. Muslimin Ilham
78 - 82
44.
KE-14
Computational Study on the Analysis of Blowing Application Towards Flow Fields on Vehicle Models with Variations on Front Geometry
Rustan Tarakka, Nasaruddin Salam, Jalaluddin, Muhammad Ihsan
83 - 87
45.
KE-15
Design and Evaluation of Energy Characteristics of a Horizontal Venturi Bulb Turbine Based on Sea Current Data of The Haya Strait
W. M. Rumaherang, R. Ufie, J. Louhenapessy, J. Latuny
88 - 92
46.
KE-01
Computational Analysis of Fluid Flows Crossing Square Cylinder Dimpled Half Ball
Nasaruddin Salam, Rustan Tarakka, Jalaluddin,Andi Machfud
1 - 7
47.
KE-17
Drag Reduction Impact of Slurry by Spiral Pipe Geometry
Yanuar,Sealtial Mau
98 - 102
48.
KE-18
Droplet Combustion Characteristics of Methanol-Kemiri Sunan Biodiesel Blends
Nurkholis Hamidi, Purnami, Rizal Maulana Fahmi
103 - 106
49.
KE-19
Effect of Diesel Engine Speed on Performance of Reciprocating Compressor
Khairul Muhajir, I Gusti Gde Badrawada,Agus Fajar W
107 - 112
50.
KE-20
Energy Engineering for Agricultural Drying System based on Diesel Engine Exhaust Gases Integrated with Rice Milling Unit
Nasruddin Aziz
113 - 119
51.
KE-21
Experimental Study of Burning Deposition Characteristics Balinese Arak Fuel in the Engine Combustion Chamber
I Gusti Ketut Sukadana, I Wayan Bandem Adnyana
120 - 125
52.
KE-22
Experimental Study of Comparation of Drift Bike Tire Traction in Asphalt, Concrete, and Grass Media on Fuel Efficiency
Ismail Thamrin, M.Alfarabi
126 - 129
53.
KE-23
Experimental Study on the Influence of Angle of Attack and Number of Blade on Break Power of Darrieus Wind Turbine Type H-Rotor Integrated with Cooling Tower
Budi Santoso, Dominicus Danardono,Miko Hadi Wijaya
130 - 133
54.
KE-24
Improvement Of Droplet Combustion Speed Of Kapuk Randu Oil With Addition Of Cengkeh Oil As Catalyst
Purnami, ING Wardana, Widya Wijayanti
134 - 138
55.
KE-25
Investigation of Lifting Force of Delivery Valve and Increased Pressure in Air Chamber of Hydram Pump
Made Suarda, I Gusti Bagus Wijaya Kusuma, Made Sucipta,Ainul Ghurri
139 - 145
56.
KE-26
Kajian Eksperimental Komparasi Efisiensi Kolektor Surya dengan Variasi Sudut Kemiringan
Firmansyah Burlian, Ismail Thamrin, Hendy Chairman
146 - 152
57.
KE-27
Konsumsi bahan bakar LCGC (Low Cost Green Car) pada kecepatan normal dan tinggi
Harwin Saptoadi
153 - 156
58.
KE-28
Modeling of Buble Flow in Horizontal Pipe
Sukamta, Thoharuddin , Roy Mukhlis Irawan
157 - 161
59.
KE-29
Numerical Simulation of Cross Flow Around Four Circular Cylinders In An In-Line Square Configuration Near A Plane Wall At Laminar Boundary Layer
Grummy Wailanduw, Priyo Heru Adiwibowo,Budihardjo Achmadi Hasyim
162 - 167
60.
KE-30
Numerical Study on Undershot Waterwheel Performance
Budiarso, Sanjaya BS. Nasution, Dendy Adanta, Warjito, Satrio AA
168 - 173
(RM) Rekayasa Material
1.
RM-28
Influence Number Of Fiberglass Layers The Sugar Palm Fiber-Fiberglass Composite With Matrix Epoxy On Impact Strength And Macrostructure
Ezra Ramadhan , Rahmat Doni Widodo
149 - 154
2.
RM-20
The Influence of Time and Temperature of Electroplating Process Steel with Copper on Coating Hardness and Thickness
Jon Affi, Afriando, Yuli Yentri
106 - 109
3.
RM-21
Variasi Jenis Serat Batang Pisang Untuk Bahan Komposit Terhadap Kekuatan Tarik
Asroni, Sulis Dri Handono
110 - 112
4.
RM-22
Water Filter Using Ceramic Natural Zeolite Water Hyacinth (Eichhornia crassipes)
Sri Mulyo Bondan Respati, Ahmad Choirun Na’im, Imam Syafa’at
113 - 117
5.
RM-23
Variations Of Temperature Pack Carburizing And Comparisons Between Media Composition Bone Cows And Coconut Across Of Low Carbon Steel
Tumpal Ojahan Rajagukguk,Slamet Sumardi
118 - 124
6.
RM-24
Karakteristik Kekuatan Tarik Komposit Datar Akibat Variasi Biaxial Pre-Loading pada reinforcement fiber
Tjuk Oerbandono, Dewangga Irwan Siregar
125 - 129
7.
RM-25
Fabrikasi Dan Karakterisasi Sifat Fisik Dan Mekanik Produk Stir Casting Komposit Daur Ulang Aluminium dengan Penambahan 26, 30 dan 34 wt % FLY ASH
Amir Arifin, Gunawan, Mirsya Rahmawan
130 - 136
8.
RM-26
Fabrikasi Keramik Hidroksiapatit Berpori Dengan Menggunakan Space Holder Alami
Gunawan, Amir Arifin,Aditya Nur Hidayat
137 - 143
9.
RM-27
Effect of fly ash powder size on the mechanical properties of Aluminum Matrix Composite Strengthened by fly ash Using the Stir Casting Method
Muhammad Syahid, Swendy Junisius Basso
144 - 148
10.
RM-19
Efektifitas tingkat serapan bunyi dari hamparan serabut kelapa tanpa penambahan unsur perekat (The effectiveness of sound absorption levels of coir sheet without adhesive elements added)
Sabri, Zahrul Fuadi, Samsul Rizal, Hiroomi Homma
100 - 105
11.
RM-29
Shooting Angle WC12Co Coating Effect to Impeller Pump’s Material for Hardening and Wear with High Velocity Oxy-Fuel (HVOF) Method
Gunawan Dwi Haryadi, Deni Fajar, Dimas Adib Karomi
155 - 160
12.
RM-30
Analysis of The Effect of Cooling Media Variation And Variation of Cooling Media Temperature on T6 Process Solution Treatment on Shape And Propeler Dimension Changes From Coal Based ALUMINUM-ASH Composite Materials
Zainun, Edi Santoso, Abdul Jalil
161 - 165
13.
RM-31
Effect of Treatment of King's Pineapple Fiber Fibers (AGAVE CANTALA ROXB) on Epoxy Matrix Wettability
Musa Bondaris Palungan, Benyamin Tangaran
166 - 170
14.
RM-32
Peat Firing Foaming Agent Selection from Fatty Acid Palm Oil Saponification Results with Simple Additive Weighting Method
Purwo Subekti, Erliza Hambali, Ani Suryani, Prayoga Suryadarma, Bambang Hero Saharjo, Mira Rivai
171 - 174
15.
RM-33
Effect of Alkaline And Hydrogen Peroxide Treatment on Changes In Coconut Fiber Diameters As Environmentally Friendly Composite Materials
Muhammad Arsyad,Rudy Soenoko
175 - 178
16.
RM-34
Analysis of Tensile Strength, Hardness and Microstructure on SMAW Welding Using E 6013 Electrodes with Variation in Electrodes Motion
Andri Santoso, Awal Syahrani, Mustafa
179 - 183
17.
RM-35
Pengaruh Panjang Serat dan Fraksi Volume terhadap Kekuatan Impact Komposit yang Diperkuat Serat Daun Gewang
Boy Bistolen,Muhamad L. Habibi
184 - 186
18.
RM-36
Pengontrolan Pori dan Uji Permeabilitas Keramik
Sulistyo,Musa Akbar
187 - 190
19.
RM-10
Increased Surface Hardness Of Aluminum Matrix Composite Through The Ceramic Coating Process
Hendri Sukma, Dwi Rahmalina, Bambang Sulaksono, Erlanda A.Pane, Ibnu Asyifa R.
49 - 55
20.
RM-02
Behavior Analysis of Widuri Fiber Effluence of NaOH Treatment to Wettability and Adhesiveness with Polyester Resin
Yeremias M. Pell, Wenseslaus Bunganaen, Vinsensius Wowa
5 - 10
21.
RM-03
Characterization of Babbitt in Steam Turbine Sliding Bearings
Mohammad Reza Hermawan, Bukti Tatigan,Dedi Lazuardi
11 - 17
22.
RM-04
Effect of Bamboo Fiber Volume Fraction on The Density, Bending and Compressive Strength of Sandwich Composite With Opened Cell Bamboo-Polyurethane Foam Core
Paryanto Dwi Setyawan, Sugiman, Agus Setiawan
18 - 22
23.
RM-05
Effect of Temperature and Casting Composition of Al-Bottom Ash Composite to The Grain Deformation In The Footstep Casting
Ichlas Wahid, Maula Nafi
23 - 26
24.
RM-06
Effect of Zeolite Addition on The Tensile Strength of Polypropylene as Injection Molding Product
Teguh Dwi Widodo, Rudianto Raharjo, Redi Bintarto, Fikrul Akbar Alamsyah,Danar Sulistyo Adi
27 - 31
25.
RM-07
Enhancement of Osteoconductivity of TNTZ by Hydrothermal Treatment
Zuldesmi,Masazumi Okido
32 - 36
26.
RM-08
Finite Element Modeling of Pit Growth on Stainless Steel Materials
Syifaul Huzni, Haris,S. Fonna, A.K. Ariffin
37 - 41
27.
RM-09
Improving The Physical and Mechanical Properties Of Al-Si Hypoeutectic Alloys with Carbide Particle Addition (SiC/p)
Juriah Mulyanti
42 - 48
28.
RM-01
Application Of Graphene Material As A Co2 Gas Sensor
Maula Nafi, Edi Santoso,Ichlas Wahid
1 - 4
29.
RM-11
Low Cycle Fatigue Analysis of an Annealed AISI 4140 Steel
Mohammad Badaruddin, Purnadi Sri Kuncoro, Ahmad Suudi,Sugiyanto
56 - 61
30.
RM-12
Modification of Coconut Shell Polypropylene Composite as Pipe Material
Rudianto Raharjo, Teguh Dwi Widodo,Redi Bintarto,Haslinda Kusumaningsih,Mirza Pramudia,M. Irkham Mamungkas
62 - 67
31.
RM-13
Peat Firing Foaming Agent Selection from Fatty Acid Palm Oil Saponification Results with Simple Additive Weighting Method
Purwo Subekti, Erliza Hambali, Ani Suryani, Prayoga Suryadarma, Bambang Hero Saharjo, Mira Rivai
68 - 71
32.
RM-14
Potential Used Finite Element Indentation Modeling approach for Characterization strength and behavior Material in Non Standard Conditions
I Nyoman Budiarsa, I Nyoman Gde Antara, I Made Gatot Karohika, I Wayan Widhiada
72 - 77
33.
RM-15
Synthesis and Characterization of Mechanical Properties of Sand Mold Metal Casting Based on Recycle Sand with Addition of Resin
Viktor Naubnome,Aa Santosa, Eri Widianto, Marno
78 - 81
34.
RM-16
Tensile Strength Test Of Material Composite Of Coconut Coir Fiber By Using Polyester Resin BQTN 157 (ASTM D 1037-99)
Syurkarni Ali,Murhaban, Herdi Susanto,Seulamat Handalansah
82 - 88
35.
RM-17
The Effect of Pour Temperature and Cooling Media on Porosity and Hardness of Al-12.6%Si Alloy Using Wet Sand Mold Casting
Rudi Siswanto,Muhammad Dhahsyad
89 - 93
36.
RM-18
The Effect of Welding Trip on Weld Strength of Friction Stir Welded of Butt Joint AA5052-AA5052 and Lap Joint AA1100-Acrylic
Devi Chandra, Rahmat Fajar, Jon Affi
94 - 99
(PMT) Perancangan dan Mekanika Terapan
1.
PMT-29
The Selection Method of A Monorail Bogie Frame Design Model
Sugiharto, Gatot Prayogo, Tresna P Soemadi,Danardono AS
169 - 178
2.
PMT-20
Improving The Work Efficiency in Production Process By Making An Automatic Welding Insert Nut Machine. Case Study in Music Industry
Paryana Puspaputra,Ferdi Arrahman,Syamsuddin D.S. , M. Syafatahillah
118 - 123
3.
PMT-21
Modification of Counter Machine Type PET (Polyethylene terephthalate)
Nuha Desi Anggraeni,Noviyanti Nugraha, Rizal Syahid Ramadhan
124 - 128
4.
PMT-22
Numerical Simulation of Salt Particle in Low-Speed Horizontal Screw Conveyor of Solar Salt Harvester
Sukmaji Indro Cahyono
129 - 134
5.
PMT-23
Perancangan dan Analisis Kekuatan Mekanisme Alat Pemindah Feed Pump Berkapasitas 8 ton
Muki Satya Permana
135 - 138
6.
PMT-24
Simulation of Quadcopter With Pid Controller And Parameters Tuning Using Direct Synthesis Method
R. Lullus Lambang G. Hidayat, Tri Nur Syaifudin
139 - 144
7.
PMT-25
Static Load Analysis of Bolster Frame Component in Metro Kapsul Train using Finite Element Method
Bagus Budiwantoro, Abdul Hakim Masyhur,Kreshna Mukti
145 - 148
8.
PMT-26
Study of Carbon Fiber And Sulfur Reinforced Geopolymers Composite for Train's Brake Blocks
Jamiatul Akmal, Zulhendri H, Ahmad Su’udi,Taufik Hidayatullah
149 - 154
9.
PMT-27
The Application of VDI 2221 Method on Embodiment Design of Pin on Disk Wear Test
Jefri S. Bale, Rima N. Selan, Dominggus G.H. Adoe,Daniel Situmorang
155 - 162
10.
PMT-28
The Effect of Saddle Web Plate Thickness to Maximum Stress of Horizontal Pressure Vessel
Krisdiyanto
163 - 168
11.
PMT-19
Flexibility of S-Shaped Pipe Bends under Thermal and Mechanical Loads
Asnawi Lubis,Novri Tanti, Rizki Rian Toni Tambunan
112 - 117
12.
PMT-30
Performace Prediction of Steel Square Tube with Crush Initiators as An Impact Energy Absorber using Numerical Methods
Mohammad Malawat,Danardono A. Sumarsono, Jamasri, Gatot Prayogo, Jos Istiyanto,Sugeng Supriyadi, Adi Winarta, Felix Dionisius
179 - 184
13.
PMT-31
Evaluation of force and torque measurement uncertainties of the three-component dynamometer of the biomimetic fin propulsion system
Arie Sukma Jaya, Muljo Widodo Kartidjo, Lavi Rizki Zuhal,Irsan Soemantri Brodjonegoro
185 - 190
14.
PMT-32
Influence of Forming Parameter in Metal Gasket Manufacture by using Finite Element Method
I Made Gatot Karohika, I Nyoman Gde Antara, I Nyoman Budiarsa,I Made Dwi Budiana Penindra
191 - 194
15.
PMT-33
Pengembangan Sistem Power Train Sepeda Menuju Terciptanya Sepeda yang Dapat Menyesuaikan dengan Volume Paru-Paru Pengendara
Hendri D.S. Budiono, Rheza Daniswara, Erlangga Lutfi
195 - 203
16.
PMT-34
Parametric Design Of Hull Toward Load Capacity On Small Scale LNG Carrier
Muhammad Arif Budiyanto, Devi Adlyani,Agus Sunjarianto Pamitran
204 - 208
17.
PMT-35
Numerical Analysis Based on Finite Element Method to Determine A Stiffness of U-Shaped Steel Damper in Variation of Loading Direction
Eka Satria, Lovely Son, Mulyadi Bur dan Muhammad Dzul Akbar
209 - 215
18.
PMT-36
Analysis of Rib and Spar Configuration to the Deformation and Stress on the Unmanned Aerial Vehicle (UAV) Wing Structure
Lovely Son,Dendi Adi Saputra dan Harsenofal
216 - 221
19.
PMT-37
Sound Source Position Estimation by Four Microphones Array for Machine Condition Monitoring
Meifal Rusli, Hendra Silman, Lovely Son, dan Mulyadi bur
222 - 230
20.
PMT-10
Crash Analysis Of Double Foam Filled Circular Tube Under Axial Impact Using Finite Element Method
Ilyas Renreng, Fauzan Djamaluddin, Thomas Tjandinegara
64 - 69
21.
PMT-02
Fracture Analysis of Rear Axle Shaft Vehicles Truck HINO 500
Achmad Kusairi Samlawi, Syauqi Rahmat Firdaus
6 - 12
22.
PMT-03
Analysis of Frame Structure a Moving Gantry type NC Router Machine for Wood Carving
Rachmad Hartono, Sugiharto, Bukti Tarigan
13 - 17
23.
PMT-04
Analysis of the Combustion Engine Component Structure Using The Finite Element Method
Sangriyadi Setio, Wiranto Arismunandar, Adi Setiakarsa, Claudia Kurniawan
18 - 28
24.
PMT-05
Analytical and Numerical Studies of Dynamic Finite Element Analysis of Coaxial Dual Rotor Systems with Pseudo Modal Method Using Matlab
Zulhendri H, Alexander Sembiring,Asnawi Lubis
29 - 38
25.
PMT-06
Automatization roaster hopper coffee
Mochamad Edoward Ramadhan,Hari Arbiantara Basuki, D A R Wulandari
39 - 43
26.
PMT-07
Averaged logarithmic ratio of filtered vibration signal for wear indicator of gearbox
A. Widodo, D. Ogie Nugroho, I. Haryanto, Dj. Satrijo,T. Prahasto
44 - 48
27.
PMT-08
Karakteristik dan respon dinamik struktur plat dudukan motor dengan kekakuan non-linier lokal (Characteristic and dynamic response structure of an engine mounting plate with local non-linear stiffness)
Claudia Kurniawan, Sangriyadi Setio
48 - 55
28.
PMT-09
Computer-Based Simulation and Stress Analysis of Constructability Study for Shell Column Repair Using Finite Element Method
Muki Satya Permana
56 - 59
29.
PMT-01
Algorithm For Determining The Feasibility Of Braking Systems Operation Of Passengers Car In Matlab Simulink
Danardono A. Sumarsono, Mohammad Adhitya, Rolan Siregar
1 - 5
30.
PMT-11
Design and Manufacture a Tool Post for Turning the Fatigue Test Standard Specimen Profile for Plastic Materials
Syamsul Hadi, Anggit Murdani, Agung Wicaksono
65 - 72
31.
PMT-12
Design of Autogluing Conveyor Composer Machine for Music Industry
Paryana Puspaputra, Dzikri Ilman Fadhillah, Syamsuddin D.S. , M. Syafatahillah
73 - 76
32.
PMT-13
Design of Data Acquisition-based Anemometer
Trihono Sewoyo, Budiono, Setiawan Wahyu N
77 - 81
33.
PMT-14
Design of Mechanical Component of Forced Vibration Apparatus
R Heni Hendaryati, Ardi Lesmawanto , Trihono Sewoyo, Budiono, Falah AK
82 - 85
34.
PMT-15
Design of Solar Tracking System
BRM Djoko Widodo, Mohamad Sahid Abdullah,Gatot Santoso
86 - 91
35.
PMT-16
Equipment Design to Enumerate Oil Palm Empty Fruit Bunch
M. Ihram Maulana, Tono Sukarnoto, Soeharsono, Desyana
92 - 98
36.
PMT-17
Evaluation Of Force And Torque Measurement Uncertainties Of The Three-Component Dynamometer Of The Biomimetic Fin Propulsion System
Arie Sukma Jaya, Muljo Widodo Kartidjo, Lavi Rizki Zuhal, Irsan Soemantri Brodjonegoro
99 - 104
37.
PMT-18
Failure Analysis On The Mini Pile Hammer
Toto Supriyono, Bukti Tarigan,Tatang Nurjaman
105 - 111
(PM) Proses Manufaktur
1.
PM-13
The Effect Of Current Flows On Surface And Micro Structure On Aisi 1045 Materials From Process Electrical Discharge Machining (EDM)
Nidia Lestari, Joko Waluyo, Muhammad Rois
76 - 80
2.
PM-25
Fabrication of Micro Pump Using Micro-Milling Method
Yudan Whulanza, Kent Chester, Mohamad Safhire, Mustafa Kamal,Reza Afrianto, Shabrina Fadhilah, Muhammad S Utomo, Gandjar Kiswanto
146 - 155
3.
PM-24
Dampak Fluktuasi Dwelling Time Impor Pada Proses Manufaktur Otomotif
Achmad Riadi, Agung Shamsuddin Saragih
141 - 145
4.
PM-23
Utilisation of Screen Printing Technique for Mini Electrodes Application
Hisyam Farhansyah Lubis, Abram Dionisisus Antory, Shabrina Fadhilah, Radon Dhelika, Yudan Whulanza
135 - 140
5.
PM-22
Pengaruh Arus Pengelasan dan Waktu Siklus Terhadap Diameter Nugget Las dan Kekuatan Tarik SS 304 Pada Pengelasan Resistance Spot Welding (RSW)
Ario Sunar Baskoro, Fatahilah Putra Kustiawan, Agus Widyianto, Mohammad Azwar Amat, Gandjar Kiswanto,Winarto
131 - 134
6.
PM-21
Planning and Heating Analysis of Squeeze Casting Die Devices for Preparation of Basic Materials for Magnesium AZ31 Bone Bolts
Yanuar Burhanuddin, Nur Wakhid, Irza Sukmana, Tarkono, A. Yudi Eka Rosano
124 - 130
7.
PM-20
Improve Performance and Maintenance Reliability Of Nitric Acid Plant As Ex-Relocation PT Multi Nitrotama Kimia
Hendra Gunawan, Catur Waluyo Hadi
116 - 123
8.
PM-19
Development of Virtual Manufacturing Using Wearable Sensor, Image Processing and 3D CAD System
Gandjar Kiswanto1, Adjeng Ayu Setiani, Dody Rakhmat Ramadhan, Ferdiansyah Zhultriza, Muhammad Fathin Juzar, Rachmad Muhammad Suryantoro
110 - 115
9.
PM-18
Design Of Micro-Edm Machines
Bagus Sukoco, Zeffry Sinaga Otniel,Jou Vanka, M. Irfan Naufal, Triyono
103 - 109
10.
PM-17
Tool Path Planning Selection For 5-Axis Rough Machining Strategy Based On Faceted Models
Gandjar Kiswanto, Himawan Hadi Sutrisno, Jos Istiyanto
96 - 102
11.
PM-16
The Influence of Mesh Ratio in Simulating Potential Distribution on Cathodic Protection of Reinforced Concrete Using BEM
Syarizal Fonna, Syifaul Huzni, Fran Toni dan Rudi Kurniawan
91 - 95
12.
PM-15
The Effect of Rubber Mold Temperature in Spin Casting Process
Risdiyono, Ridwan Budi Santoso,Dwi Suheryanto
86 - 90
13.
PM-14
The Effect of Pressure on Fiber Orientation and Tensile Strength in Fiberglass Laminate Composite
Khairul Anam,Anindito Purnowidodo
81 - 85
14.
PM-01
Analysis of Tool Wear of Two Flute Endmill with Initial Hole in ST60 Dry Machining
Ahmad Yusran Aminy, Lukmanul Hakim Arma, Mukhtar Rahman
1 - 4
15.
PM-12
Simulation of Sand Casting Process in a Machine Tool Component
Indrawanto, Yatna Yuwana Martawirya,Xengmoua Vaneng
70 - 75
16.
PM-11
Pengaruh Variasi Waktu Pengelasan dan Kecepatan Putar pada Pengelasan Gesek (Friction Welding) terhadap Kekuatan Tarik Aluminium 6061
Iis Siti Aisyah, Yusuf Amin Nurdin, Dimas Faidurrahman, Trihono Sewoyo, Mochammad Syamsul Maarif
63 - 69
17.
PM-10
Pengaruh Jenis Perekat Alam Terhadap Karakteristik Mekanik Sambungan Kayu Balsa dan Kayu Pinus
Moch. Syamsul Ma’arif, Khairul Anam, Resza Tania Putri,Muhammad Fadlurahman
57 - 62
18.
PM-09
Pengaruh Gerak Makan dan Kedalaman Potong Terhadap Kekasaran Permukaan Magnesium pada Pemesinan Freis dengan Teknik MQL
Gusri Akhyar Ibrahim, Arinal Hamni, Tarkono, Muchlis Mutaqqin, Ahmad Su’udi
51 - 56
19.
PM-08
Parametric Design: A Case Study in Helical Gear Designing
Ilham Andrizal Siregar, Muhamad Faroqi Jayadi, Ilham Firmansyah, Franklin Geraldi Utomo, Mulki Rahmat Muhammad, Sri Raharno,Martawirya Yatna Yuwana
44 - 50
20.
PM-07
Meningkatkan Performa dan Mempertahankan Kehandalan Pabrik Asam Nitrat Ex-Relokasi PT. Multi Nitrotama Kimia
Hendra Gunawan, Catur Waluyo Hadi
36 - 43
21.
PM-06
Impelementasi Metode Taguchi pada Pemesinan Bor Material Ringan Magnesium AZ31
Gusri Akhyar Ibrahim, Arinal Hamni, Hari Subagio
28 - 35
22.
PM-05
Geometric Accuracy Tests of Reconditioned Turning Machine and Its Effect on the Accuracy of the Finished Workpieces
Rusnaldy,S. A. Widyanto, Paryanto,Z. S. Azmy
23 - 27
23.
PM-04
Evaluating the role of friction time in dissimillar metals friction welded joints
Djarot B. Darmadi, Muttaqien Tashirulumur ,Achmad As’ad Sonief
18 - 22
24.
PM-03
Effect of Variation Number of Flutes and Cutting Parameters In Conventional Milling Process of Aluminum 6063
Redi Bintarto, Rudianto Raharjo,Teguh Dwi Widodo
10 - 17
25.
PM-02
Effect of Tool Tilt Angle on the Microstructure and Mechanical Properties of Friction Stir Welded Aluminum AA5083
Wisnu Wijayanto, Kuncoro Diharjo,Triyono
5 - 9
(PTM) Pendidikan Teknik Mesin
1.
PTM-01
Analysis Of Effectiveness Of The Application Of E-Learning Schoology In Kupang Vocational Schools
Fahrizal,Damianus Manesi,Wofrid E. Bianome
1 - 5
2.
PTM-02
Blend Formulation of Learning Outcomes from SN-Dikti / KKNI, IABEE, and Ulil Albab: Experience in Formulating Learning Outcomes of Mechanical Engineering Department of Universitas Islam Indonesia
Agung Nugroho Adi, Purtojo
6 - 14
3.
PTM-03
Decision Support for Quality Control in Brick Production (Case Study in Kupang)
Fahrizal,Damianus Manesi,Asrial
15 - 20
4.
PTM-04
Integration of Face–to-face Lectures and Practicum to Optimize the Learning System in CAD Modeling Subjects
Arif Budi Wicaksono, Faisal Arif Nurgesang,Irfan Aditya Dharma
21 - 26
5.
PTM-05
Forensic Analysis of a Mini Hydro Power Plant Failure using Failure Mode And Effects Analysis
Claudia Kurniawan, Hendra Maidani,Sangriyadi Setio
27 - 36
6.
PTM-06
Innovation in University in the era of Industry 4.0
Ardiyansyah Yatim, Nurkholis, Fathkul Mujib, Ade Setiawan
37 - 43
7.
PTM-07
Social Impact of Installing Solar Home Systems with Energy Saving Lights in Dusun Niskolen
Yossie M.Y. Jacob,Matheus M. Dwinanto
44 - 47
8.
PTM-08
A study on research collaboration patterns via co-authorship data:a case study in Faculty of Engineering, Universitas Indonesia
Radon Dhelika, Sugeng Supriadi, Yudan Whulanza, Agung Shamsuddin Saragih
48 - 52
9.
PTM-09
How to Select An Apropriate Teaching Aid for Subject of Buckling of Column using Weighted Objectives Method
Eka Satria, Jhon Malta dan Arief Rahmat Hakim
53 - 59